|
Some of our products have been phased out. We will not continue to keep these old product documents updated. If you need documents which are in some of these discontinued products, please find the corresponding models below. Thanks for your understanding. |
Powers, Electronic Loads
- AC power supply(Power Supplies
- 5.7”large LCD display
- Various output modes and measurement functions
- AC-superimposed DC output
- Capacitor input load supported
- Sequence function
- Limiter function
- 30 Sets of SAVE / RECALL memories
- USB(USBTMC)standard for remote control
- Output On/Off Function
- AC power supply
- 5.7”large LCD display
- 5.7" Large LCD Display
- Output Capacity: 1kVA(for AC 200V Input)
- Output Modes: AC and AC+DC Combined with any of four signal sources
- Output Capacity: 1kVA(for AC 200V Input)
- Sequence function to do high Efficient load simulations
- Flexible configuration with mainframes and plug-in modules
- Multiple independent load inputs up to 8 channels in a mainframe
- Parallel connection of inputs for increased load capacity
- Parallel connection of inputs for static and dynamic tests
- Multiple channels run for dynamic tests under one clock control
- Maximum rated power for low range high resolution CC tests
- Von setting and Von on/off for start-up Von tests
- Program mode to create work routines for repetitive tests
- OPP/OCP/OVP/OTP protections
- External channel control/monitoring via an analog control connector
- Multi-Interface USB Device / Host, RS-232C, and GPIB (Optional)
- Multi-mainframe link up to 5 mainframes in a system
- Flexible configuration with mainframes and plug-in modules
- Sequence function to do high Efficient load simulations
- Flexible configuration with mainframes and plug-in modules
- Multiple independent load inputs up to 8 channels in a mainframe
- Parallel connection of inputs for increased load capacity
- Parallel connection of inputs for static and dynamic tests
- OPP/OCP/OVP/OTP protections
- External channel control/monitoring via an analog control connector
- Multi-Interface USB Device / Host, RS-232C, and GPIB /LAN (Optional)
- Flexible configuration with mainframes and plug-in modules
- True RMS Meter
- Wide Output Voltage / Frequency Variable Range
- Save/Recall 4 Sets of Voltage/Frequency Memory
- Over Current Protection and Over Temperature Protection
- Wide Output Voltage / Frequency Variable Range
- 0.01% High Regulation
- Constant Voltage and Constant Current Operation
- Low Ripple and Noise
- Overload and Reverse Polarity Protection
- 3 1/2 Digits 0.5" LED Display
- Constant Voltage and Constant Current Operation
- Easy Operation with UP/DOWN Key
- High Resolution: 10mV, 1mA
- Over Voltage Protection, Over Current Protection by Hardware
- 100 Sets of Memory
- High Resolution: 10mV, 1mA
- Digitized programmable interface
- high resolution 10mV, 1mA
- 192 x 128 LCD display, simultaneously
- Over-voltage, over-current, over temperature protection
- high resolution 10mV, 1mA
Compare