DC Power Supplies

 

Filtered by

Filtered by

Max. Power Range
DC Voltage Range
DC Current Range
Special Feature
Number of channels
Power Technic
Series Mode
Parallel Mode
Voltage Resolution
Current Resolution
Panel Output
Overload Protection
Output ON/OFF
Memory
Interface
Display
Software Support
MORE OPTIONS
  • Multi-channel: maximum 720W for dual-channel models and maximum 1080W for triple-channel models; output latency between channels with the same voltage model is less than 0.1ms
  • 4.3”TFT LCD Display
  • Setting resolution: 1mV / 0.1mA; read back resolution: 0.1mV / 0.1mA
  • Low ripple noise: ≦1mVrms/ ≦2mArms
  • Transient response time: ≦100µS
  • 4.3”TFT LCD Display
  • Supports Setting Value, Measurement Value and Output Waveform Display
  • Load Function (CC, CV, CR Mode)
  • Setting Resolution: 1mV / 0.1mA; Read Back Resolution: 0.1mV / 0.1mA
  • Dual Channel DC Power Output
  • PPH-1503D (CH1: 0~15V/0~3A or 0~9V/0~5A; CH2: 0~12V/0~1.5A)
  • PPH-1506D (CH1: 0~15V/0~3A or 0~9V/0~5A; CH2: 0~12V/0~3A)
  • PPH-1510D (CH1: 0~15V/0~3A or 0~9V/0~5A, 0~4.5V/0~10A
  • Easy operation with UP/DOWN key
  • High resolution: 10mV, 1mA
  • Over voltage protection by software
  • 50 Sets memory
  • Self test and software calibration
  • Easy operation with UP/DOWN key
  • High Resolution: 10mV, 1mA
  • Over voltage protection, over current protection by hardware
  • 50 Sets memory
  • Self test and software calibration
  • 2/3/4 Independent Isolated Output
  • 4 LED Display Sets: 3 digits after decimal point
  • Minimum Resolution :
  • 1mV/1mA(GPD-2303D/GPD-3303S/GPD-4303S)
Compare