PEL-2000A Programmable D.C. Electronic Load
Features
  • Sequence function to do high Efficient load simulations
  • Flexible configuration with mainframes and plug-in modules
  • Multiple independent load inputs up to 8 channels in a mainframe
  • Parallel connection of inputs for increased load capacity
  • Parallel connection of inputs for static and dynamic tests
  • OPP/OCP/OVP/OTP protections
  • External channel control/monitoring via an analog control connector
  • Multi-Interface USB Device / Host, RS-232C, and GPIB /LAN (Optional)

Satisfy All Your High Speed Load Simulation Needs


The PEL-2004A and PEL-2002A are multiple channel, programmable DC electronic loads with a modularized structure. The PEL-2000A Series is designed to meet the continuing shift toward high speed operation in today's semiconductor market. As the power supply units, DC-DC converters, and batteries that drive semiconductor circuits to follow this shift, power supply design, quality inspection, and characteristic certification using high-speed performance loads have become necessary.

 

The PEL-2000A Series includes two types of mainframes and 4 types of load modules to accommodate users' requirements in a flexible manner. Any load module combination can be used with a mainframe to tailor a test system based on the number of channels, and the maximum load power, voltage and current of each channel. Multiple loads can be connected in parallel to provide a higher-power load to test higher power supply outputs. This flexibility significantly reduces the investment needed for future projects that have different power requirements. The PEL-2004A is a 4-slot mainframe with a master control unit to hold 4 load modules, while PEL-2002A is a 2-slot mainframe with master control unit to hold 2 load modules. When the PEL-2004A is configured with 4 load modules rated at 350W each, the PEL-2000A series is able to sink up to 1.4kVA of power.

 

For higher load capacities, mainframes can be linked together in parallel with standard MIL 20-pin connectors. A maximum of 5 mainframes, including one master and 4 slaves can be chained together to create a total load capacity of 7kW for high current and high power applications. Using 4 dual channel load modules, the PEL-2004A is able to test 8 power supply outputs simultaneously. The Sequence function allows each channel to change its load sink according to a predefined sequence at a rate of up to 100 s per step.

 

Each sequence is able to run concurrently under the control of one clock. This is one of the most powerful features of the PEL-2000A ASeries as it is able to realistically simulate a multi-output power supply load. Under Dynamic mode, the load current or load resistance pulses between two preset levels at a pre-defined speed up to 25 s per step. This is often used as the standard test procedure to verify the response of a power supply to quick load changes. Most remarkably, multiple load channels can be connected in parallel to run Dynamic tests synchronously under a single clock. This Parallel Dynamic functionality gives the flexibility to perform dynamic tests for a high-power power supply without the need of another high-power load.

 

The PEL-2000A Series includes a number of protection modes: Over Current Protection (OCP), Over Voltage Protection (OVP), Over Power Protection (OPP), Reverse Voltage Protection (RVP), and Under Voltage Protection(UVP). The protection modes are useful to protect both the load modules and the DUT(s). A buzzer can be set when a protection setting has been tripped. When a protection mode has been tripped, the load unit will display an alarm and stop sinking current/voltage. When a load unit is operating in CR or CV mode, the unit may need Over Current Protection to prevent excessive current being sunk. Over Current Protection stops the load from sinking more current than its recommended limit and prevents the load from burn-out damage.

 

Over Voltage Protection is used to limit the amount of voltage sink. If the OVP trips, the PEL-2000A Series load will stop sinking voltage. Over Power Protection is used when the input power exceeds the specifications of the load. When OPP is tripped, the power will cease to be sunk. Reverse Voltage Protection prevents reverse voltage damage to the PEL-2000A Series up to the specified rating. When Reverse Voltage Protection has been tripped, an alarm tone will sound until the reverse voltage is removed. Under Voltage Protection will turn off the load when the voltage drops below a set limit. The Go/NoGo function is available to monitor test results all the time.

 

When a test result goes beyond a preset limit range, a "No Go" indication will be shown on the display and a "No Go" signal can be sent out through the D-SUB interface for external device control. This Go/NoGo function is available for CC mode, CV mode, and CR mode. Under "Program" mode, 12 programs, each containing 10 panel setup memories, can be edited to create work routines for repetitive tests. After a program has been executed, the results of all test steps, along with the Go/NoGo judgments, will be shown on the screen.

 

For external control and system configuration, the PEL-2000A series has USB and RS-232 interfaces as standard and LAN as well as GPIB as an option. The LabView driver and Data Logging PC software are both supported for all the available interfaces. Each channel has an analog control/monitoring connector on the rear panel to externally turn a load on/off and to externally monitor load input current and voltage.

 

 

Standard Accessories
Power Cord, CD ROM Contains PEL-2000A Series Electronic DC Load User Manual, Programming Manual and USB Driver
GTL-120 Load cables 2X red, 2X black (per load module)
GTL-121 Remote sense cables , 1X red, 1X black (per load channel)
PEL-003 3 sets for PEL-2004A; 1 set for PEL-2002A

 

Optional Accessories
PEL-001 GPIB interface (Factory installed)
PEL-002 Rack mount kit and Handle (Only for PEL-2004A)
PEL-003 Panel Cover
PEL-016 LAN Card

GTL-248 GPIB Cable(2m)
GTL-249 Frame Link Cable
GTL-246 USB Cable, USB 2.0 A-B TYPE Cable, 4P
GTL-232 RS-232C Cable, 9-pin, F-F Type, null modern, 2000mm

PEL-2002A 2-Slot Programmable D.C. Electronic Load Mainframe
PEL-2002A 2-Slot Programmable D.C. Electronic Load Mainframe Where to buy
PEL-2004A 4-Slot Programmable D.C. Electronic Load Mainframe
PEL-2004A 4-Slot Programmable D.C. Electronic Load Mainframe Where to buy
PEL-2020A 200W, Dual Channel D.C. Electronic Load Module, (1~80V, 20A, 100W) x2
PEL-2020A 200W, Dual Channel D.C. Electronic Load Module, (1~80V, 20A, 100W) x2 Where to buy
PEL-2030A 200W, Dual Channel D.C. Electronic Load Module, (1~80V, 5A, 30W) & (1~80V, 40A, 250W)
PEL-2030A 200W, Dual Channel D.C. Electronic Load Module, (1~80V, 5A, 30W) & (1~80V, 40A, 250W) Where to buy
PEL-2040A 350W, Single Channel D.C. Electronic Load Module, (1~80V, 70A, 350W)
PEL-2040A 350W, Single Channel D.C. Electronic Load Module, (1~80V, 70A, 350W) Where to buy
PEL-2041A 350W, Single Channel D.C. Electronic Load Module, (2.5~500V, 10A, 350W)
PEL-2041A 350W, Single Channel D.C. Electronic Load Module, (2.5~500V, 10A, 350W) Where to buy
PEL-2020B 200W, Dual Channel D.C. Electronic Load Module, (1~80V, 20A, 100W) x2
PEL-2020B 200W, Dual Channel D.C. Electronic Load Module, (1~80V, 20A, 100W) x2 Where to buy
PEL-2030B 200W, Dual Channel D.C. Electronic Load Module, (1~80V, 5A, 30W) & (1~80V, 40A, 250W)
PEL-2030B 200W, Dual Channel D.C. Electronic Load Module, (1~80V, 5A, 30W) & (1~80V, 40A, 250W) Where to buy
PEL-2040B 350W, Single Channel D.C. Electronic Load Module, (1~80V, 70A, 350W)
PEL-2040B 350W, Single Channel D.C. Electronic Load Module, (1~80V, 70A, 350W) Where to buy
PEL-2041B 350W, Single Channel D.C. Electronic Load Module, (2.5~500V, 10A, 350W)
PEL-2041B 350W, Single Channel D.C. Electronic Load Module, (2.5~500V, 10A, 350W) Where to buy
User Manual
The User Manual of PEL-2000A series
2024-05-14
User Manual version.,EN 9.50 MB DOWNLOAD
LinkVIeW Software Manual
LinkVIeW Control software for Power system
2024-04-24
LinkVIeW Software Manual version., 2.39 MB DOWNLOAD
Software
LinkVIeW Application software(Free of Charge) Must install NI-VISA before executing
2023-12-27
Software version1.52.0.r0244 ., 【Member Only】 58.16 MB DOWNLOAD
Programming Manual
The Programming Manual of PEL-2000A series
2024-05-14
Programming Manual version.,EN 4.28 MB DOWNLOAD
Firmware
The firmware of PEL-2000A Series, V3.00 (UPG)
2022-10-05
Firmware version3.00., 【Member Only】 996 KB DOWNLOAD
3D Model
PEL-002, STEP format
2021-11-30
3D Model version., 【Member Only】 32 KB DOWNLOAD
2D Drawing
PEL-002, DWG/PDF format
2021-11-30
2D Drawing version., 【Member Only】 570 KB DOWNLOAD
2D Drawing
2D Drawing of the PEL-2000A Modules, DXF/PDF format
2021-06-29
2D Drawing version., 【Member Only】 302 KB DOWNLOAD
3D Model
3D Model of PEL-2000A Modules​, STEP format
2021-06-29
3D Model version., 【Member Only】 1.21 MB DOWNLOAD
2D Drawing
2D Drawing of the PEL-2004A, DWG/PDF format
2021-06-29
2D Drawing version., 【Member Only】 484 KB DOWNLOAD
3D Model
3D Model of the PEL-2004A, STEP format
2021-06-29
3D Model version., 【Member Only】 5.42 MB DOWNLOAD
2D Drawing
2D Drawing of the PEL-2002A, DWG/PDF format
2021-06-29
2D Drawing version., 【Member Only】 354 KB DOWNLOAD
3D Model
3D Model of the PEL-2002A, STEP format
2021-06-29
3D Model version., 【Member Only】 4.18 MB DOWNLOAD
PC Software
PEL-2000A PC Software only applies to 64 bits windows.
2020-05-12
PC Software version., 245.91 MB DOWNLOAD
Firmware
PEL-2000A firmware upgrade program and procedure.
2021-10-20
Firmware version2.15., 【Member Only】 1.06 MB DOWNLOAD
Brochure
The Brochure of PEL-2000A series
2024-05-14
Brochure version1.,EN 2.80 MB DOWNLOAD
Quick Start Guide
The Quick Start Guide of PEL-2000A PC software
2021-09-27
Quick Start Guide version2.,EN 1.16 MB DOWNLOAD
Upgrade Guide
The PEL-2000A upgrade guide. (With PEL-2000 to PEL-2000A).
2018-01-11
Upgrade Guide version1.,EN 164.3 KB DOWNLOAD
Firmware
The firmware of PEL-2000/2000A series, V2.07.
2018-01-11
Firmware version2.07.,EN 【Member Only】 797.3 KB DOWNLOAD
LabVIEW Driver
The PEL-2000/PEL-2000A LabVIEW Driver.
2019-04-16
LabVIEW Driver version1.0.0.,EN 1.04 MB DOWNLOAD
USB Driver
The PEL-2000/2000A USB Driver.
2018-01-11
USB Driver versionA.,EN 5.4 KB DOWNLOAD
Sequence File Editor
The PEL-2000A Sequence file editor.
2018-01-11
Sequence File Editor versionA.,EN 606.2 KB DOWNLOAD