Search Value：
- Category： -
- Subcategory： -
- Series： -
- Keyword： -
Result：302
- CV, CC priority start function.
- Four levels of current measurement resolution (min. 0.1μA) / two levels of voltage measurement resolution (min. 0.1mV)
- Power output ON/OFF delay function
- Adjustable voltage and current slew rate
- Four levels of current measurement resolution (min. 0.1μA) / two levels of voltage measurement resolution (min. 0.1mV)
- 5-digit digital voltage, current and power meter
- Simultaneous display of voltage, current, and watts
- Short-circuit time can be set during short-circuit test
- Simultaneous display of voltage, current, and watts
- CC, Linear CC, CR, CV, CP and AC Rectifier Load Mode
- Frequency Range : DC, 40~440Hz
- Turbo Mode for 2 Times the Current and Power of Electronic Load within 1 Second
- Frequency Range : DC, 40~440Hz
- Maximum power up to 192KW
- Up to 8 units of master/slave parallel control
- 5-digit digital voltage, current and power meter
- Large LCD Display
- Up to 8 units of master/slave parallel control
- 150VA AC Test Capacity
- 3 in 1 Tester : AC, DC, IR
- Built-in 8 channel Scanner
- 480 x 272 Color TFT LCD
- Test parameter Export / Import through USB host
- 3 in 1 Tester : AC, DC, IR
- 500VA AC Test Capacity
- Short Circuit current > 200mA
- Comply with IEC 61010-2-034
- 7”TFT LCD
- Manual / Auto Mode
- Short Circuit current > 200mA
- 5”TFT LCD
- DC, 0.1Hz ~ 100kHz voltage/current test bandwidth
- Two numerical display modes: General mode: displays 2 main test items + 8 secondary test items ; Simple mode: displays the test values of 4 main test items
- DC, 0.1Hz ~ 100kHz voltage/current test bandwidth
- Provide Analysis, Design, Simulation and Implementation Verification for Power Electronics
- Allow Students With no DSP Firmware Programming Capability to Easily Complete Programming so as to Swiftly Proceed to Digital Control Domain
- Provide Analysis, Design, Simulation and Implementation Verification for ower Electronics
- Provide Analysis, Design, Simulation and Implementation Verification for Power Electronics
- Allow Students With no DSP Firmware Programming Capability to Easily Complete Programming so as to Swiftly Proceed to Digital Control Domain