PEL-5000G Series High Power DC Electronic Load
Features
  • 5 digital V / A / W Meter can be displayed on Large LCD display simultaneously
  • Flexible CC, CR, CV, CP, CV + CL, CV + PL, Dynamic and short circuit operation modes
  • Not only CC, CR, and CP mode have parallel operation functions, but CV mode also has parallel operation functions
  • Surge Test mode for Capacitive load for current rising transient test
  • Voltage meter display can be configured as polarity positive(”+”)or negative(“-”)
  • Master-slave control is up to 1 Master and 7 Slaves
  • Optional Interface: GPIB, RS232, USB, LAN
  • SEQ Load Mode's programmable function allows for ultra-high-speed step changes from 0.02 to 999000 ms in CC or CP mode
  • Provide battery BMS protection test function
  • Optional 9923 load current waveform generator to provide the battery actual discharge current waveform simulation
  • Built-in test modes include Battery Discharge, BMS, Short circuit, OCP, OPP test modes
  • Turbo mode can withstand up to 1.5 times the current and power electronic load within 2 sec. period, most fit BMS, Short circuit, OCP, OPP test
  • Protection against V, I, W, and ℃
MORE DETAIL CLOSE

 

If you can't see the YouTube video, please click here.

 

 

GW Instek PEL-5000G series single-channel electronic load provides 150V/ 600V/ 1200V models with a power range of 4kW~6kW. PEL-5000G has a total of 9 models featuring different combinations of power, voltage, and current. It can test and verify the specifications of batteries, electric vehicle chargers/charging stations and electric vehicle batteries. PEL-5000G supports parallel connection for same voltage specification and different power models. PEL-5000G can support up to 8 units connected in parallel to provide a maximum power of 48kW.

 

For the scenario of Battery Charger testing, PEL-5000G specifically provides four battery discharge modes, namely CV+Current Limit test mode, CV+Power Limit test mode,  CC mode and CP mode. Users can choose a suitable test mode according to the test requirements.

 

For Battery Discharge Function, users can set the discharge cut-off voltage, discharge time, or discharge capacity (Ah) in CC or CP mode to meet the battery testing requirements.

 

In order to meet the verification requirements of different DUTs, PEL-5000G provides a variety of test functions, Surge current test mode, automated OCP, OPP test functions and 150 sets of parameter storage function. The 1200V model of PEL-5000G not only provides full power output at 1000V, but also provides 60% power output at 1200V output, which is higher than the 50% power output of other manufacturers of similar electronic loads.

 

High-voltage batteries or chargers directly connected to the electronic load may cause damage to the electronic load. PEL-5000G has a built-in slow starter, which not only protects the DC load, but also saves the user's installation cost and setting time for measurement on 600V/1200V models.

 

The communication interfaces supported by PEL-5000G include GPIB, RS232, USB, and LAN. The power, voltage and current of each model are shown in the following table:

 

Power / Voltage

150V

600V

1200V

4kW

PEL-5004G-150-400

(400A)

PEL-5004G-600-280

(280A)

PEL-5004G-1200-160

(160A)

5kW

PEL-5005G-150-500

(500A)

PEL-5005G-600-350

(350A)

PEL-5005G-1200-200

(200A)

6kW

PEL-5006G-150-600

(600A)

PEL-5006G-600-420

(420A)

PEL-5006G-1200-240

(240A)

 

 

 

Standard Accessories

 

SLS10B RED; PLUG CONN 20A RED T × 1

SLS10B BLK; PLUG CONN 20A BLK T × 1

PTV1-12;PIN TRML × 4

HD-DSUB 15pin MALE to MALE 150cm × 1

RND SCREW M4x0.7+S+P L=20mm × 4

Hexagon head M8*1.25 L=25mm NI × 2

K-NUT M4X0.7 NI × 4

NUT M8X1.25 NI × 2

WASHER INSIDE DIA-8.5 OUTSIDE × 4

SPRING WASHER INSIDE φ8 × 2

PEL-5004G,PEL-5005G,PEL5006G handles : PEL-028 × 1

Rack Mount Kit For PEL5004G,PEL-5005G,PEL-5006G : PEL-031 × 1

 

Optional accessories

 

PEL-030    GPIB+RS232 interface
PEL-023   RS232 interface
PEL-032  9923+RS232 interface
PEL-022  GPIB interface
PEL-025

 USB interface + USB driver

(The driver can be downloaded)

PEL-024

 LAN interface + LAN driver

(The driver can be downloaded)

GTL-250 GPIB Cable, 1m  GPIB cable
GTL-248 GPIB Cable, 2m  GPIB cable
GTL-246 USB Cable, 1.2m  USB cable

 

 

Ordering information

 

 

 

 

 

 

Normal mode*

  • PEL-5004G-150-400 (150V,400A,4kW)
  • PEL-5005G-150-500 (150V,500A,5kW)
  • PEL-5006G-150-600 (150V,600A,6kW)
  • PEL-5004G-600-280 (600V,280A,4kW)
  • PEL-5005G-600-350 (600V,350A,5kW)
  • PEL-5006G-600-420 (600V,420A,6kW)
  • PEL-5004G-1200-160 (1200V,160A,4kW)
  • PEL-5005G-1200-200 (1200V,200A,5kW)
  • PEL-5006G-1200-240 (1200V,240A,6kW)

 

Turbo mode*

  • PEL-5004G-150-400 (150V,600A,6kW)
  • PEL-5005G-150-500 (150V,750A,7.5kW)
  • PEL-5006G-150-600 (150V,900A,9kW)
  • PEL-5004G-600-280 (600V,420A,6kW)
  • PEL-5005G-600-350 (600V,525A,7.5kW)
  • PEL-5006G-600-420 (600V,630A,9kW)
  • PEL-5004G-1200-160 (1200V,240A,6kW)
  • PEL-5005G-1200-200 (1200V,300A,7.5kW)
  • PEL-5006G-1200-240 (1200V,360A,9kW)

 

* Regarding the product delivery date, please contact your regional sales representative.

 

 

 

User Manual
The user manual of PEL-5000G Series
2024-05-10
User Manual versionC.,EN 7.25 MB DOWNLOAD
USB Driver
The USB Driver of AEL-5000/PEL-500/PEL-5000C/PEL-5000G
2024-10-01
USB Driver versionV408., 10.66 MB DOWNLOAD
PC Software
The PC Software of PEL-5000G/5000C/500
2024-10-01
PC Software versionR1.2H., 2.86 MB DOWNLOAD
Brochure
The Brochure of PEL-5000G Series
2023-06-09
Brochure version.,EN 5.70 MB DOWNLOAD
3D Model
3D Model of the PEL-5000G, STEP format
2023-04-28
3D Model version., 【Member Only】 5.01 MB DOWNLOAD
2D Drawing
2D Drawing of the PEL-5000G, DWG/PDF format
2023-04-28
2D Drawing version., 【Member Only】 502 KB DOWNLOAD