Product Search
HOME
Search Value：
Result：298
GPT-9800
GPT-9800 Electrical Safety Tester
  • 200VA AC Test Capacity
  • 240x64 Ice Blue Dot matrix LCD
  • Manual/Auto Mode
  • Function Key for quick selecting
  • High intensity flash for Caution & Status indication
LCR-6000
LCR-6000 Precision LCR Meter
  • 3.5” color LCD
  • 5 models (10Hz~2kHz/20kHz/100kHz/200kHz/300kHz)
  • Consecutive test frequency
  • Basic accuracy : 0.05%
  • Measuring speed up to 25ms (max.)
GDM-8255A
GDM-8255A Dual Display Digital Multimeter (Discontinued)
  • GDM-8255A 199,999 Counts Display
  • VFD Two Colors Display
  • 0.012% DCV Accuracy
  • True RMS (AC, AC+DC)
  • 9 Major Measuring Functions and 10 Advanced Measurement Functions
PEL-3000E
PEL-3000E Programmable D.C. Electronic Load
  • 7 Operating Modes: CC, CV, CR, CP, CC+CV, CR+CV, CP+CV
  • Fast/ Normal Sequence Function
  • Soft Start
  • Battery discharge test
  • OCP、OPP test Automation
  • Max. Slew Rate: 2.5A/us
  • Dynamic mode
  • Protection: OVP, OCP, OPP, OTP, RVP, UVP
  • Remote Sense
  • Integrate voltage, current and power measurement functions
  • External Voltage or Resistance Control
  • Rear Panel BNC、Trigger IN/OUT
  • Analog External Control
  • USB/GPIB(Optional)
APS-7000E
APS-7000E AC Power Sources
  • 4.3 inch TFT-LCD Display
  • Output Capacity: APS-7050E(500VA, 310Vrms, 4.2/ 2.1Arms), APS-7100E(1000VA, 310Vrms, 8.4/ 4.2Arms)
  • Only 88mm(2U) case height
  • Measurement function comprises Voltage, Current, Power, Current(peak), Frequency, Power Factor
GFG-8200A
GFG-8200A (Discontinued)
  • Frequency Range: 0.3Hz ~ 3MHz (GFG-8215A/8216A/8217A/8219A)
  • Frequency Range: 0.5Hz ~ 5MHz (GFG-8250A/8255A)
  • Waveforms: Sine, Triangle, Square,Ramp, TTL and CMOS Output
  • External Voltage Controlled Frequency (VCF) Function
  • Two-Steps (-20dBx2) and Variable Attenuator
  • Built-In 6 Digits Counter with INT/EXT Function up to 150MHz(Except GFG-8215A)
  • INT/EXT AM/FM Modulation (GFG-8219A/8255A)
  • GCV Output for Synchronization (GFG-8219A/8255A)
SFG-1000
SFG-1000 DDS Function Generator (Discontinued)
  • DDS Technique and FPGA Chip Design
  • Frequency Range:0.1Hz~3MHz
  • High Frequency Accuracy : ± 20ppm
  • High Frequency Stability : ± 20ppm
  • Max. Frequency Resolution : 100mHz
  • Low Distortion Sine Wave : -55dBc,0.1Hz~200kHz
  • Voltage Display (Only SFG-1013)
AFG-303x & AFG-302x
AFG-303x & AFG-302x Arbitrary Function Generator
  • 1uHz to 20 or 30MHz, 16-bit resolution with 1 mVpp to 10 Vpp amplitude. 1 or 2 channel (s)
  • 250 MSa/s sampling rate for higher time resolution arbitrary waveforms
  • 8M Points/channel standard waveform memory
GRF-1300
GRF-1300 (Discontinued)
  • Waveform Support: Sine/Square/Triangle
  • Base-band Wave: 0.1 ~ 3MHz
  • RF Frequency : 870 ~ 920MHz
  • AM Modulation & FM Modulation
GSP-9300
GSP-9300 (Discontinued)
  • Frequency Range: 9kHz ~ 3GHz
  • High Frequency Stability: 0.025ppm
  • 3dB RBW: 1Hz ~ 1MHz
  • 6dB EMI Filter: 200Hz, 9kHz, 120kHz, 1MHz
  • Phase Noise: -88dBc/Hz @1GHz, 10kHz Offset
  • Built-in Measurement Functions: 2FSK Analysis, AM/FM/ASK/FSK Demodulation & Analysis, EMC Pre-test, P1dB point, Harmonic, Channel Power, N-dB bandwidth, OCBW, ACPR, SEM, TOI, CNR, CTB, CSO, Noise Marker, Frequency Counter, Time Domain Power, Gated Sweep
  • Built-in Spectrogram and Topographic Display Modes
  • 886MHz IF Output for User’s Extended Applications
  • Remote Control Interface: LAN, USB, RS-232, GPIB (Optional)
  • Built-in Preamplifier, 50dB Attenuator, and Sequence Function
of
30