Search Value：
- Category： -
- Subcategory： -
- Series： -
- Keyword： -
Result：298
- Simplify the complicated EMC measurement and debugging
- Including Conduction EMI Testing, Radiation EMI Testing
- GSP-9330 Spectrum analyzer with EMI Mode
- GKT-008 EMI Probe Set for pretest
- Including Conduction EMI Testing, Radiation EMI Testing
- 4.3”TFT LCD Display
- Supports Setting Value, Measurement Value and Output Waveform Display
- Load Function (CC, CV, CR Mode)
- Setting Resolution: 1 mV / 0.1 mA; Read Back Resolution: 0.1 mV / 0.1 mA
- Supports Setting Value, Measurement Value and Output Waveform Display
- 3.5’ TFT LCD (320x240)
- Measurement items: DC voltage and AC resistance
- Voltage measurement: 1000V (GBM-3100H) or 300V (GBM-3300) or 80V (GBM-3080)
- Resistance measurement: 0mΩ~ 3.2kΩ(max.)
- Measurement items: DC voltage and AC resistance
- Application for Oscilloscopes.
- 4” TFT LCD
- Two data display modes
- Standard : two major measurement items + six secondary measurement items
- Simple : displaying test data of four different measurement items
- Two data display modes
- Constant Power Output for 5 Times Multi-range(V&I) Operation
- Natural Convection Cooling Design (Fanless Structure)
- Preset Memory Function
- Output ON/OFF Delay Function
- CV, CC Priority Mode
- Adjustable Slew Rate For Voltage and Current
- Bleeder Circuit Control
- Natural Convection Cooling Design (Fanless Structure)
- Output Voltage Rating：20V / 36V / 60V
- Output Power：360W / 720W
- Low Ripple and Noise (0.5mVrms/ 10mArms)
- Fast transition recovery time(100us)
- Output Power：360W / 720W
- GDM-8251A 120,000 Counts Display
- VFD Two Colors Display
- 0.012% DCV Accuracy
- True RMS (AC, AC+DC)
- 9 Major Measuring Functions and 10 Advanced Measurement Functions
- 2W/4W Resistance Measurement
- VFD Two Colors Display
- Frequency Range: 9kHz ~ 3GHz
- High Frequency Stability: 25ppb (0.025ppm)
- RBW: 10Hz ~ 10kHz in 1-3 steps, 10kHz ~ 1MHz in 10% adjustable steps
- Phase Noise: -88dBc/Hz @1GHz, 10kHz Offset
- High Frequency Stability: 25ppb (0.025ppm)
- Combining a Logic Probe and Pulser Combined into One
- Probe for Troubleshooting Digital Circuits
- Operating Voltage: 4VDC ~ 18VDC
- Maximum Input Signal Frequency: 50MHz
- Probe for Troubleshooting Digital Circuits