PEL-5000C High Power Compact DC Load
Features
  • Maximum power up to 192KW
  • Up to 8 units of master/slave parallel control
  • 5-digit digital voltage, current and power meter
  • Large LCD Display
  • Display voltage value, current value, watt value at the same time
  • Suitable for power factor regulator (PFC) testing (600V, 1200V models)
  • Automatically perform OCP, OPP test
  • The power-on state value can be set
  • Constant current, constant resistance, constant voltage, constant power, constant current + constant voltage, constant power + constant voltage, dynamic and short circuit modes
  • Short circuit time can be set during short circuit test
  • Over current, over power, over temperature protection and over voltage warning
  • Voltage polarity display can be set to positive value ("+") or negative value ("-")
  • Support solar panel MPPT test
  • Optional interface: GPIB, RS232, USB, LAN
MORE DETAIL CLOSE

GW Instek PEL-5000C series single-channel electronic load provides 150V/ 600V/ 1200V models with a power range of 6kW~24kW. PEL-5000C has a total of 24 models featuring different combinations of power, voltage, and current. It can test and verify the specifications of batteries, electric vehicle chargers/charging stations, electric vehicle batteries and solar panels. PEL-5000C supports parallel connection for same voltage specification and different power models. PEL-5000C can support up to 8 units connected in parallel to provide a maximum power of 192kW.

For the scenario of battery testing, PEL-5000C specifically provides four battery discharge modes, namely CC+CV battery discharge test mode, CP+CV battery discharge test mode, CC+ UVP battery discharge test mode, and CP+ UVP battery discharge test mode. Users can choose a suitable test mode according to the test requirements. In addition to the four battery discharge modes, PEL-5000C also provides Time period discharge, Pulse discharge, and RAMP discharge modes. Users can set the discharge time, or discharge in the pulse current mode, or even set the rising/falling slew rate of the discharge current. These functions can be very flexible in the simulation of the battery discharge current waveform when an electric vehicle is running.

In order to meet the verification requirements of different DUTs, PEL-5000C provides a variety of test functions, including inrush current test mode, solar panel MPPT test mode, automated OCP, OPP test functions and 150 sets of parameter storage function. The 1200V model of PEL-5000C not only provides full power output at 1000V, but also provides 60% power output at 1200V output, which is higher than the 50% power output of other manufacturers of similar electronic loads. High-voltage batteries or chargers directly connected to the electronic load may cause damage to the electronic load. PEL-5000C has a built-in slow starter, which not only protects the DC load, but also saves the user's installation cost and setting time for measurement.

 

 

Optional Accessories

 

PEL-022  GPIB Card
PEL-023

 RS-232 Card

PEL-024

 LAN Card

PEL-025

 USB Card

PEL-026

 Hook ring

PEL-027

 Rack mount kit

PEL-028

 HANDLES, U-shaped handle (fixed to the bracket)

PEL-030

 GPIB+RS-232 Card 

GTL-248

 GPIB Cable, 2m

GTL-250

 GPIB Cable, 0.6m

GTL-246

 USB Cable, 1.2m

HD-DSUB

 15PIN Parallel wire

 

 

 

PEL-5006C-150-600

150V,600A,6kW

High Power DC  Electronic Load

PEL-5008C-150-800

150V,800A,8kW

High Power DC  Electronic Load

PEL-5010C-150-1000

150V,1000A,10kW

High Power DC  Electronic Load

PEL-5012C-150-1200

150V,1200A,12kW

High Power DC  Electronic Load

PEL-5015C-150-1500

150V,1500A,15kW

High Power DC  Electronic Load

PEL-5018C-150-1800

150V,1800A,18kW

High Power DC  Electronic Load

PEL-5020C-150-2000

150V,2000A,20kW

High Power DC  Electronic Load

PEL-5024C-150-2000

150V,2000A,24kW

High Power DC  Electronic Load

PEL-5006C-600-420

600V,420A,6kW

High Power DC  Electronic Load

PEL-5008C-600-560

600V,560A,8kW

High Power DC  Electronic Load

PEL-5010C-600-700

600V,700A,10kW

High Power DC  Electronic Load

PEL-5012C-600-840

600V,840A,12kW

High Power DC  Electronic Load

PEL-5015C-600-1050

600V,1050A,15kW

High Power DC  Electronic Load

PEL-5018C-600-1260

600V,1260A,18kW

High Power DC  Electronic Load

PEL-5020C-600-1400

600V,1400A,20kW

High Power DC  Electronic Load

PEL-5024C-600-1680

600V,1680A,24kW

High Power DC  Electronic Load

PEL-5006C-1200-240

1200V,240A,6kW

High Power DC  Electronic Load

PEL-5008C-1200-320

1200V,320A,8kW

High Power DC  Electronic Load

PEL-5010C-1200-400

1200V,400A,10kW

High Power DC  Electronic Load

PEL-5012C-1200-480

1200V,480A,12kW

High Power DC  Electronic Load

PEL-5015C-1200-600

1200V,600A,15kW

High Power DC  Electronic Load

PEL-5018C-1200-720

1200V,720A,18kW

High Power DC  Electronic Load

PEL-5020C-1200-800

1200V,800A,20kW

High Power DC  Electronic Load

PEL-5024C-1200-960

1200V,960A,24kW

High Power DC  Electronic Load

User Manual
The user manual of PEL-5000C
2021-03-23
User Manual Ver..,EN 9.74 MB DOWNLOAD
LabVIEW Driver
PEL-5000C LabVIEW Driver (for LabVIEW 2009)
2021-03-23
LabVIEW Driver Ver.1.0.0., 401 KB DOWNLOAD
Brochure
The brochure of PEL-5000C Series.
2021-01-22
Brochure Ver..,EN 1.79 MB DOWNLOAD