Features
- Support quick charger：QC2.0 / QC3.0 / PE+ / PE+2.0 / USB PD
- Suitable for all Electronic Load
- Provide communication interface: RS232
- Suitable for all Electronic Load
9922 Quick Charger controller provides support for quick charging, Pump Express and UBS PD-3 charging protocol simulation for test purposes.
The 9922 controller can simulate fast charge protocol signals for mobile phones, tables and notebook computers for a wide variety of fast charging devices to support rapid testing and verification of the device charger.
A standard banana plug can be connected directly to the binding post of an electronic DC load allowing the DC load to simulate load for the fast charging power supply under test.
For connection to the unit under test (UUT), the 9922 provides a Micro USB and a USB Type C socket interface. Images of the front panel and rear of the controller are shown in Figure 1. Pin out definitions for both USB sockets are detailed in Table 1 and Table 2.
Other USB charger connector types can be accommodated by using specific adaptor cables such as USB Type A to Micro USB, USB Type A to USB Type C or USB Type C to USB Type C. These cables can be plugged in to the 9922 Quick Charger Controller's Micro USB or USB Type C ports.
| 9922 | Quick Charger Controller |
| 9922-R | Quick Charger Controller（Built-in RS232） |
Applications
The Applications of 9922-R
2026-03-17
Applications
The Applications of 9922
2026-03-17
User Manual
The user manual of 9922-R
2026-03-17
User Manual
The user manual of 9922
2026-03-17