Search Value：
- Category： -
- Subcategory： -
- Series： -
- Keyword： -
Result：277
- LED mode load for LED Power Driver test.
- Simulate LED Forward Bias Voltage (Vd) and Resistance (Rd).
- Built-in dimming control signal for PWM dimming test.
- 5 digital V / A / W Meter.
- Simulate LED Forward Bias Voltage (Vd) and Resistance (Rd).
- With parallel function maximum power up to 320 KW.
- 5 digit V/A/W Meter.
- High-speed measurement and communication transmission.
- Large LCD Display、setting values can be adjusted by rotary knob or push button.
- 5 digit V/A/W Meter.
- 200/100/70MHz bandwidth selections: 2 or 4 channels
- MSO-2000E equips with a 16-channel logic analyzer
- MSO-2000EA equips with a 16-channel logic analyzer and a dual channel 25MHz arbitrary waveform generator
- MSO-2000E equips with a 16-channel logic analyzer
- Dual Channel DC Power Output
- PPH-1503D (CH1: 0~15V/0~3A or 0~9V/0~5A; CH2: 0~12V/0~1.5A)
- PPH-1506D (CH1: 0~15V/0~3A or 0~9V/0~5A; CH2: 0~12V/0~3A)
- PPH-1510D (CH1: 0~15V/0~3A or 0~9V/0~5A, 0~4.5V/0~10A
- PPH-1503D (CH1: 0~15V/0~3A or 0~9V/0~5A; CH2: 0~12V/0~1.5A)
- Three independent, isolated output
- CH3 adjustable output : 0.1~5V/3A
- High efficiency power conversion (up to 25% more than traditional power supply)
- Remote output on/off control
- CH3 adjustable output : 0.1~5V/3A
- 100/60/40/25 MHz Bandwidth with 2 Input Channels
- 250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling
- 4k Memory Length per Channel
- Peak Detect as Fast as 10ns
- 250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling
- 20,000/2,000 Counts Dual Display
- Test Frequency : 100/120Hz/1/10/100kHz
- Auto LCR Mode for DUT Measurements
- 0.2% Basic Accuracy
- Measurement Parameters : L,C,R,D,Q,ESR,θ,DCR
- Test Frequency : 100/120Hz/1/10/100kHz
- 50,000 counts, VFD display
- Dual measurement/Dual display
- Selectable measurement speeds, the maximum: 40 Readings/s for DCV
- The basic precision of DC voltage: 0.02%
- Auto/manual Ranging
- Dual measurement/Dual display
- Wide Frequency Ranges From 1μHz to 25MHz (sine/square wave)
- 1 μHz Resolution in Full Range
- Built-in Standard 120MSa/s, 10bit, 4k Points Arbitrary Waveform for Both Channels
- True Dual-Channel Output, CH2 Provides the Same Characteristics as CH1
- Couple, Tracking, Phase Operations of Dual Channel are Supported
- 1% ~ 99% Adjustable Duty Cycle for Square Waveform
- High Resolution and Colored TFT LCD with Friendly User Interface
- Multiple Editing methods to Edit Arbitrary Waveform Easily
- Built-in Standard AM/FM/PM/FSK/SUM/Sweep/Burst and Frequency Counter
- USB Host/Device Interface for Remote Control and Waveform Editing
- 1 μHz Resolution in Full Range
- Low Noise Floor(-117dBm@1GHz, 3k RBW)
- Sequence Programming Functions
- ACPR, OCBW, Channel Power, N-dB and Phase Jitter Measurements
- 10 Markers with Delta Marker, Peak Functions
- Sequence Programming Functions