Features
- With parallel function maximum power up to 320 KW.
- 5 digit V/A/W Meter.
- High-speed measurement and communication transmission.
- Large LCD Display、setting values can be adjusted by rotary knob or push button.
- Voltage、Current and Watt value can be displayed simultaneously.
- Capable for Power Factor Correction (PFC) Test. (for 600 V,1000 V models)
- OCP、OPP test function automatically.
- Power ON status can be set.
- CC, CR, CV, CP, CC+CV(CV with Current Limit) ,CP+CV(CV with Power Limit), Dynamic and Short operation mode.
- SHORT time setting.
- Protections against I,W,°C and over-voltage alert.
- Voltage meter display the polarity positive（”＋”）or negative（”－”）is selectable.
- Optional Interface : GPIB、RS232、USB、LAN.
- Support MPPT CV test function for solar panel
- 0.7 V @ 1000 A is on Static condition, and the starting voltage must be greater than 5 V, if on Dynamic condition that is 5 V @ 1000 A
- Built-in soft-start circuit function allowing the U.U.T. power supply to be directly connected to the 342XA、343XA series load input terminal, no longer need a large relay switch with an external soft-start circuit.
- 5 digit V/A/W Meter.
MORE DETAIL
CLOSE
- 34000A Series has its own control and display panel, CC / CR / CV / CP / Dynamic modes, 150 sets Store / Recall memory which provides load set-up more efficiently, also can be remote controlled via GPIB、RS232、USB and LAN interface.
- SHORT time setting and SHORT_VH, SHORT_VL setting function, also can measure Short Voltage and Current.
- Dynamic can be simulated under CC, CP mode. The current Rise / Fall slew rate can be adjusted individually and there is an external signal input for an Arbitrary Waveform to simulate load current.
- Single key for OCP、OPP test function will be more efficiency and accuracy on OCP、OPP testing.
- Programmable Load ON/OFF voltage, GO/NG meter check, Voltage meter display ”+ “ or “ – “ is selectable and 150 sets Store/Recall larger memory is much advance feature for each different application.
- 150 sets test parameter and status storage function, user can recall the storage memory real time in accordance with the auto sequence requirement.
- Maximum Voltage up to 1000 V provide an idea testing solution for Power Factor Correction test.
- Master / Slave control units maximum are up to 1 MASTER, 7 SLAVES.
Standard Accessories
Banana Plug x 2 PCs
BNC-BNC CABLE L=1M x 1 PC
HD-DSUB 15PIN Parallel Cable x 1 PC
Hex Head Screw M8*1.25 L=35mm NI x4 PCs
Round Head Phillips Screw M8*1.25 L=35mm NI x4 PCs
NUT M8 x 1.25 NI x 4 PCs
WASHER INSIDE DIA-8.5 OUTSIDE x 8 PCs
Power Cord x 1 PC
Optional Accessories
- GPIB Card
- RS-232 Card
- LAN Card
- USB Card
- Hook Ring
- GPIB Cable 1 m
- GPIB Cable 2 m
- USB Type A to Type B Cable 1.8 m
Ordering information
- 34105A (60 V, 1000 A, 5 kW)
- 34125A (60 V, 1000 A, 25 kW)
- 34130A (60 V, 1000 A, 30 kW)
- 34135A (60 V, 1000 A, 35 kW)
- 34140A (60 V, 1000 A, 40 kW)
- 34225A (600 V, 800 A, 25 kW)
- 34230A (600 V, 960 A, 30 kW)
- 34235A (600 V, 1120 A, 35 kW)
- 34240A (600 V, 1280 A, 40 kW)
- 34325A (1000 V, 250 A, 25 kW)
- 34330A (1000 V, 300 A, 30 kW)
- 34335A (1000 V, 350 A, 35 kW)
- 34340A (1000 V, 400 A, 40 kW)
Application
The Application of 34000A/36000A Series_E
2025-07-28
PC Software
The PC Software of 34000A Series
2025-07-28
LAN Driver
The LAN Driver of 34000A/PEL-5000C/PEL-500 (for WIN7, WIN8, WIN10)
2025-07-28
USB Driver
The USB Driver of 34000A/PEL-5000C/PEL-500 (for WIN7, WIN8, WIN10)
2025-07-28
Brochure
The brochure of 34000A Series_E
2025-07-28
User Manual
The user manual of 34000A Series_E
2025-07-28