
Version 1.00
Initial Version.

Version 1.01
1. Added PID Code identification for ODM HOPE
2.Modify the HiZ Icon position (when the db or dbm function is turned on, the position will overlap)
3. Fixed the issue where the last digit of Math value setting would be 0
4. Modify the scpi command calc:db:ref return and setting to follow RefMethod
5. Fixed the problem that the TMC test could not be performed by continuous command using LabVIEW
6. Fixed the problem that scpi cannot return continuous commands
7. Modify the word "GetTime" (Change GetTime to GateTime) 
8. Modify the single display font size (84 to 90)
9. Modify MODEL_NAME_NUM_MAX length (10->15)
10. Modified the problem that HiZ Icon does not change when switching range in single trigger mode.
11. Modified the content of 20V HiZ Warning Message (increase the unit of value)
12. Fixed the issue where the FloatToLong() function would cause incorrect value unit conversion
13 Fixed the problem that when injack is 2A in frequency/cycle mode, range cannot be set to 2A
