 |
|
|
 |
|
|
 |
 |
|
|
|
* Frequency Range: 150kHz ~1GHz
* Fully Digital Phase Locked Loop Technique Design
* High Frequency Stability:±10ppm
* High Resolution of Span to Measure the More Detailed Signal: Zero, 2kHz~100MHz/div
* RBW : 3K, 30k, 220k, 4MHz
* High Input Protection Level : +30dBm,±25VDC
* Reference Level Range : -30dBm~ +20dBm
* Good Noise Floor Performance: -95dBm @30kHz, -100dBm Typical @220kHz RBW
* Two Markers for Absolute and Relative Measurement
* Functions: Max. Hold, Average (2~32 Traces), Freeze, Peak Search, Marker to Center Functions
* 10 Memories of Save/Recall
* RS-232C Interface and Software to get Trace from GSP-810 to PC
* Options: Tracking Generator, Power Meter, Remote Control Software |
|
 |
|
|
|
|
1GHz Spectrum Analyzer
The GSP-810 Spectrum Analyzer is a digitally synthesized, easy-to-use RF measurement instrument with a frequency range up to 1GHz. It uses a state-of-art design with a phased-locked RF system that combines measurement quality and performance with an affordable price. The GSP-810 is also designed for rugged use with 1-watt input protection. With a compact size and feature packed functions, the GSP-810 is an affordable, expandable, and high quality instrument for the most demanding needs.
|
FREQUENCY
|
|
Frequency Range
|
150kHz~1GHz
|
|
Aging Rate
|
± 10ppm, 0~50°C, 2ppm/yr
|
|
Span Range
|
Zero, 2kHz~100MHz/div in 1-2-5 sequence
|
|
Phase Noise
|
-77dBc/Hz @ 1GHz 30kHz offset
|
|
Frequency Resolution
|
1kHz C.F. entry, 40Hz sweep resolution at 2kHz/div
|
|
Frequency Display
|
6 1/2 digit setting
|
|
Frequency Control
|
Digital phase locked
|
|
RESOLUTION BANDWIDTH
|
|
RBW Range
|
3kHz, 30kHz, 220kHz, 4MHz
|
|
RBW Accuracy
|
15%
|
|
Video Bandwidth Range
|
1.6kHz/90kHz couple with RBW
|
|
AMPLITUDE
|
|
Measurement Range
|
-100dBm~+20dBm
|
|
Overload Protection
|
+30dBm continuous, ± 25VDC
|
|
Reference Level Range
|
-30dBm~+20dBm
|
|
Amplitude Display Range
|
75dB
|
|
Amplitude Accuracy
|
±1.5dB typical @ 0dBm, 80MHz
|
|
Frequency Flatness
|
±1.5dB over 100MHz,±2.5dB typical over entire band/±3dB:150kHz~10MHz
|
|
Amplitude Level Linearity
|
± 1.5dB over 70dB
|
|
DYNAMIC RANGE
|
|
Average Noise Floor
|
-95dBm @30kHz RBW, -100dBm typical /
-75dBm: 150kHz~10MHz
|
|
Third Inter-Modulation
|
<-70dBc, @-40dBm input, 2tones, 2MHz apart/
<-45dBc:150kHz~10MHz
|
|
Harmonic Distortion
|
<-40dBc, RF input < selected reference
|
|
Non-Harmonic Spurious
|
<-60dBc typical down from reference level, average, 5MHz/div
|
|
DISPLAY SYSTEM
|
|
Display Device
|
CRT Display, 8 x 10 graticule, 6-inch waveform screen
LCD Display, 4 line x 20 character data screen
|
|
Display Function
|
Center Frequency Control, Bandwidth,
Reference Level, Span Range, Amplitude
|
|
FUNCTIONS
|
|
Marker Mode
|
Absolute, relative, PK->marker, marker->center
|
|
Number of Markers
|
2
|
|
Marker Resolution
|
0.1dB, 1kHz
|
|
Marker Accuracy
|
0.1dB±amplitude accuracy
|
|
Memory
|
10 save/recall memory
|
|
Trace
|
Max. hold, average(2~32 traces), freeze(Hold)
|
|
Setup
|
Access parameters
|
|
Demodulator
|
WB FM, 120kHz deviation
MB FM, 75kHz deviation
NB FM, 30kHz deviation
AM
Outputs : Internal speaker, 3.5mm stereo jack,
wired for mono operation
|
|
Calibrate Signal
|
80MHz, -30dBm
|
|
Interface
|
RS-232C standard & remote display software
(The software will be downloaded from GW Web-Site.)
|
|
POWER SOURCE AC
|
|
|
|
100V/120V/220V/230V ±10%, 50/60Hz
|
|
ACCESSORIES
|
|
|
User manual x 1, Power cord x 1
|
|
DIMENSIONS & WEIGHT
|
|
|
|
310(W) x 150(H) x 455(D) mm
Approx. 8.5kg
|
User Manual x 1, Power cord x 1
GSP-810 1GHz Spectrum Analyzer
|
Opt. 01
|
Tracking Generator
|
· Frequency range: 150kHz ~ 1GHz
· Amplitude range: -50 ~ 0dBm
· Amplitude resolution: 1dB
· Amplitude accuracy: ±1dB @ 0dBm, 80MHz
· Attenuation accuracy: ±1dB @ 50MHz
· Amplitude flatness: ±1dB @10MHz/div, 1.5dB @0dB, entire band
· Harmonics: < -30dBc (<-25dBc, 150kHz ~ 10MHz)
· Reverse power: < +30dBm
· Impedance: 50 ohm nominal
· Return loss: < 10dB (VSWR < 2)
· Connector: Type N female
|
|
Opt. 02
|
Power Meter
|
· Frequency Range: 10MHz ~ 2 GHz, usable to 2.7GHz
· Power Level Range: -20 dBm ~ +23 dBm, usable to +30 dBm
· Power Level Overload: +40 dBm < 10% duty cycle, < 10 mS duration
· Return Loss: < 1:1.35 VSWR into 50 ohms, < 1:1.25 typical
· Readout Resolution: 0.2 mW, 100 mW scale, 2 W, 1 mW scale; 0.1dB, Log scale
· Accuracy: ±(10% rdg 1digit)
· Readout: mW or dBm
|
|
Opt. 03
|
Remote Control Software
|
· Connecting PC to get the trace and provide the control for setting
|
|
OPTIONAL ACCESSORIES
|
|
ATA-001
|
BNC Antenna
(An additional ADP-001 is needed for fitting GSP spectrum analyzers)
|
|
ATA-002
|
Near Field Probe
(An additional ADP-001 & GTL-110 is needed for fitting GSP spectrum analyzers)
|
|
RLB-001
|
Return Loss Bridge RLB Frequency Range 10MHz ~ 1GHz
|
|
GTP-3000
|
Passive touch Probe Set
PR-03: Passive touch probe, SMA(F)
ADP-002: Adaptor, SMA(J/F) ~ N(P/M)
GTL-303: RF Cable Assembly, SMA(P/M), 600mm
|
|
GKT-001
|
General Kit set
ADP-002: adaptor, SMA(J/F) ~ N(P/M) x 2
ATN-100: 10dB attenuator, N(J/F) ~ N(P/M) x 1
GTL-303: RF cable assembly(SMA(P/M),RD316,600mm)x2
GSC-002: Kit box x 1
|
|
GKT-002
|
CATV Kit set
ADP-001: adaptor, BNC(J/F) ~ N(P/M) x 2
ADP-101: adaptor, BNC(J/F)75Ω ~ BNC(P/M)50Ωx 2
GTL-304: RF cable assembly(RG223,N(P/M)-N(J/F),300mm)x2
GSC-003: Kit box x 1
|
|
GKT-003
|
RLB Kit set
GAK-001: termination 50 , N(P/M) x 1
GAK-002: Cap with chain, N(P/M) x 1
GTL-302: RF cable assembly(RG223,N(P/M),300mm)x2
GSC-004: Kit box x 1
|
|
GKT-006
|
EMI Probe Kit set
ANT-01: 6cm Loop, H-Field Probe x 1
ANT-02: 3cm Loop, H-Field Probe x 1
ANT-03 6mm Stub tip, E- Field Probe x 1
PR-03: Touch Passive Probe x 1 ADP-02: N(P/M)~SMA(J/F) Adapter x 1
ADP-01: N(P/M)~BNC(J/F) Adapter x 1
Test Lead: BNC(P/M)~BNC(P/M) RF Cable x 1
Test Lead: SMA(P/M)~SMA(P/M) RF Cable x 1
|
|
GTL-301
|
RF Cable RG 223 N(P/M), 1000mm
|
|
|
|
 |
 |
|
|
|
|
|
|